Tom,

love the look of the nav station - have to start thinking more carefully
about how I will re-do mine.,

thanks for the pic they were awesome.

patrick
Ada Eight

>From: Pamarno@comcast.net
>Reply-To: baba-l@ballreich.net
>To: baba-l@ballreich.net
>Subject: Re: [Baba-L] NAV station
>Date: Thu, 12 Oct 2006 01:39:47 +0000
>
>Wow!!!!
>Such a handsome installation. I will look more carefully at my 1980 Baba
>config. Loran is gone and the shelves were designed for the 80's scale of
>the state of the art. Kenwood,radar & etc...
>Thank you for sharing.
>Pam Hooper
>Pamarno
>
>-------------- Original message --------------
>From: "Tom Beard" <tom16@wavecable.com>
>
> > So, while I had my camera at the boat today and at the same time also
> > finishing a job I never thought I'd ever get done, I photographed it
>too.
> > This is our completed nav station. I cut out Formica topped plywood to
>fit
> > the openings above, then mounted the radar screen in the smaller and a
>new
> > Garmin nav screen in the larger. At the rear of the tabletop I put a
> > six-inch wide by 3/8 inch teak plank (varnished, of course, to match)
>with a
> > boarder frame and cut out to hold the instruments, autopilot controller
>and
> > VHF radio. It sits about four inches out from the rear bulkhead. It does
>not
> > go full-length but stops short on the outboard end where the battery
> > switches are located. When I turned the power on this afternoon,
>everything
> > worked! Oh, to have such days....Neptune was surly smiling.
> >
> > Tom
> > MOONSHADOW

>From: "Tom Beard" <tom16@wavecable.com>
>To: <baba-l@ballreich.net>
>Subject: [Baba-L] NAV station
>Date: Wed, 11 Oct 2006 02:27:22 +0000
><< boat030copy.jpg >>

-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html
Received on Thu Oct 12 22:26:43 2006