Hi Rich,

I don't know if this is different on your T-40, but on our Baba 30, the
screws were hidden under bungs in the base. Check your base for bungs.

We had problems with the screws loosening from the sole so we dug out
the bungs, removed the screws, and replaced them with through-bolts. (We
still haven't gotten around to replacing the bungs and it looks like
heck, but boy is it solid!)

I hope this is at least a little helpful.

Cindy

Richard Cassano wrote:
> I'm trying to remove the two bases that hold the pedestal for the salon
> table. All the small screws around the perimeter of the teak plate have
> been taken out. There are no screws or bolts under the floor, yet the
> bases are still very well secured. Has anyone done this before? The
> removal is all part of the fuel tank project. Any advice would be very
> helpful. Thanks
>
> Rich Cassano
> S/V Gray Eagle, Tashiba 40
>
>
> -----------------------------------------------------------
> Baba Panda and Tashiba Owners Mailing List --
> For more info, please check out the FAQ...
> http://www.ballreich.net/hypermail/baba-l/faq.html
>

-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html
Received on Sat Nov 25 16:13:18 2006