I would recommend removing and rebedding the entire track.
This should be done every 10 years or so.
In the short term, I would just remove the single bolt and then
reinstall with goop in the hole - it may work temporarily.

At 01:57 PM 7/17/2006, you wrote:
>Hi all,
>
>One of the bolts holding my jib track down has suddenly started to
>leak. I'm not sure if I should just pull that bolt and re-bed it
>or pull the whole track and do each bolt. I'm thinking I would
>pull the track so that I can inspect and make sure I don't have any
>moisture problems under the track. Is there a gasket that goes
>under the track or does each bolt / hole get sealed
>individually? Should I just clean each hole, coat the bolt with
>life calk and replace?
>
>Any help would be most appreciated.
>
>Cherie
>s/v Karma
>Baba 40
>
>

-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html
Received on Mon Jul 17 11:42:08 2006