If you guys were in the UK, you could call Angle-Grinder Man for help!
http://news.bbc.co.uk/1/hi/england/west_midlands/3485625.stm

Cindy


Richard Cassano wrote:
> Tom, Rob, Bruce,
>
> Thanks for all the advice on grinders. I think I have the idea and will
> check them out and make a decision tomorrow. I would like to get this part
> of the work underway as the weather here is very mild for this time of the
> year. While it's pleasant out I don't mind working on the boat. On the dust
> hazard - this is worthwhile advice. I'll be sure to get a full paper suit
> with hood. I use a 3M mask but need to change the filters before I start the
> grinding. I should have picked up this tool a long time ago. In the past I
> struggled to complete jobs using a small finishing sander with heavy grit
> paper.
>
> Thanks and Happy New Year to all
> Rich Cassano
>
>
> -----Original Message-----
> From: owner-baba-l@ballreich.net [mailto:owner-baba-l@ballreich.net] On
> Behalf Of Tom Beard
> Sent: Thursday, December 29, 2005 4:30 PM
> To: baba-l@ballreich.net
> Subject: RE: [Baba-L] Small grinder for FRP prep work
>
> I agree with Rob on the grinder. I keep and use a Makita angle grinder for
> many purposes including an emergency device to cut shrouds.
>
>
>
> -----------------------------------------------------------
> Baba Panda and Tashiba Owners Mailing List --
> For more info, please check out the FAQ...
> http://www.ballreich.net/hypermail/baba-l/faq.html
>



-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html

Received on Thu Dec 29 15:52:28 2005