>
> > Would it be smart to install a new cutlass now knowing that I won't wet
> the boat for at least 1 1/2 to 2 years.


If you are going to be pulling the prop shaft anyway, why not do it now? I=
f
you are not pulling the prop shaft why not wait until shortly before you
launch so that there is no chance of damage while sitting. (Of course if
the shaft will be turning fast, and the bearing is currently badly worn I
suppose you could damage the transmission).

> Another subject, will damage be done to start the engine with the boat on
> the hard(of course supplying water etc for cooling and only running in
> neutral). I would like to run it on occasion without doing damage to the
> boat.


Diesels aren't real happy running in neutral, and in fact (as I have been
told), should get a workout while loaded if they are started. That suggest=
s
that running the engine to warm it up with no load is not the best idea.

Mark Bergin



-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html

Received on Mon Dec 19 12:21:30 2005