Baba Panda Tashiba Mailing List

Re: Sheaves for Kenyon Mast, Baba 40

Archive Index: Full Archive Yearly Archive

Re: Sheaves for Kenyon Mast, Baba 40

From: Shane Wilson <vermeerasia_at_hotmail.com>
Date: Wed Dec 20 2006 - 15:14:15 PST

Rick (and Dave):

Thanks for the replies. Yes, Ed would be my first choice to have these made
-- he does fine work. The problem at the moment is my friends are at a very
roll-y anchorage in Mexico and unable to actually go aloft and get the
dimensions. After talking to them this morning, I think they will have to
go aloft once they reach a more stable location before this can be sorted
out.

Again, thanks for the advice.

Best Regards,

Shane

>From: Richard Cassano <rcassano@optonline.net>
>Reply-To: baba-l@ballreich.net
>To: baba-l@ballreich.net
>Subject: Re: [Baba-L] Sheaves for Kenyon Mast, Baba 40
>Date: Wed, 20 Dec 2006 17:33:03 -0500
>
>I just received new custom made sheaves for both ends of the boom reefing
>lines. They were made by Ed Louchard at the following web site.
>
> > http://www.zephyrwerks.com/
>
>The original reefing sheaves that I had were all for wire. I believe all
>the Kenyon sheaves on our Baba's are wire sheaves with a narrow groove
>which will cause rope to chafe. Ed made a new set and they are beautiful -
>made from black delrin with bronze bushings. The cost was very reasonable
>and Ed was a pleasure to work with. I'm not sure if the outboard boom
>sheaves are the same diameter as the masthead halyard sheaves but you can
>have my old ones if you do not want to make up new ones. The diameter of
>the sheave is 95mm with a center hole of 13mm. They are aluminum with the
>Kenyon logo. Take a look at the web site - his prices are all posted. Be
>sure to take your own measurements of the sheave box as he makes everything
>exactly for your installation or you can send in the old stuff and he can
>duplicate it.
>
>Rich Cassano
>S/V Gray Eagle
>
>Shane Wilson wrote:
>>A friend with a Baba 40 is experiencing main halyard chaffing damage and
>>suspects a broken sheave (spelling?) at the mast head.
>>
>>Does anyone have a part number or a source for replacement mast head
>>sheaves for the Kenyon mast?
>>
>>Thanks,
>>
>>Shane Wilson
>>Panda 40 - Muse
>>Port Townsend, WA
>>
>>
>>
>>
>>-----------------------------------------------------------
>>Baba Panda and Tashiba Owners Mailing List --
>>For more info, please check out the FAQ...
>>http://www.ballreich.net/hypermail/baba-l/faq.html
>>
>
>
>-----------------------------------------------------------
>Baba Panda and Tashiba Owners Mailing List --
>For more info, please check out the FAQ...
>http://www.ballreich.net/hypermail/baba-l/faq.html

-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html
Received on Wed Dec 20 15:14:32 2006

Archive Index: Full Archive Yearly Archive