Baba Panda Tashiba Mailing List

RE: Cap Rail "Scarf" Joint

Archive Index: Full Archive Yearly Archive

RE: Cap Rail "Scarf" Joint

From: van ford <vfsail_at_simpledsl.com>
Date: Thu Jul 06 2006 - 08:42:27 PDT

I (most likely others as well) would appreciate pics of your project. I
would imagine from your description that it really looks great.

Van...

-----Original Message-----
From: owner-baba-l@ballreich.net [mailto:owner-baba-l@ballreich.net]On
Behalf Of Moulin, Cherie
Sent: Thursday, July 06, 2006 11:17 AM
To: baba-l@ballreich.net
Subject: RE: [Baba-L] Cap Rail "Scarf" Joint

Frank,

I'm in the process of re-doing mine right now. I got some tips off the
Bristol finish website. Here's a link to the site and they show a scarf
joint right on the main page.

http://www.star-distributing.com/bristol/features.htm

I took a dremmil and cleaned out all the varnish and other material that
was in the joint leaving a nice clean joint. I then sanded down to bare
wood about an inch on each side of the joint, taped it off cleanly with
blue tape and filled it with black 5200. I used a razor blade and
scraped the excess off then peeled the tape immediately. I now have
about 6 coats of Bristol on just the joint and am in the process of
sanding it down to even it out with the rest of the rail.

I experimented on just one joint but it looks great and I have now
started on the others. I have before and after photos I can post if
you would like to see them.

By the way, this is the first time I'm using Bristol Finish and I really
like it.

Cherie
s/v Karma
Baba 40

-----Original Message-----
From: owner-baba-l@ballreich.net [mailto:owner-baba-l@ballreich.net] On
Behalf Of Frank Vitale
Sent: Wednesday, July 05, 2006 7:55 PM
To: baba-l@ballreich.net
Subject: [Baba-L] Cap Rail "Scarf" Joint

We're redoing our britework on our Baba 30 and have been watching the
cap
rail scarf joint beginning to part ever so slightly. Several folks have
suggested stripping down to bare wood in the immediate vicinity of the
joint
and adding epoxy to fill in and seal the joint.

Is this the best way to repair the joint before refinishing? Will it
leave a
joint discoloration when finished?

Any experiences in addressing this issue are welcome.

Frank Vitale
S/V Sojourn - Boston, MA
Baba 30

-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html

-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.762 / Virus Database: 510 - Release Date: 9/13/2004
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.762 / Virus Database: 510 - Release Date: 9/13/2004
-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html
Received on Thu Jul 6 08:42:23 2006

Archive Index: Full Archive Yearly Archive