Baba Panda Tashiba Mailing List

Re: Back from the trip

Archive Index: Full Archive Yearly Archive

Re: Back from the trip

From: Alan Sugarman <sugarman_at_sugarlaw.com>
Date: Wed Mar 29 2006 - 09:44:16 PST

I was getting a lot of smoke - same engine. Problem was a clogged
exhaust elbow.
These need to be replaced periodically - not a hard job to do.

Re pitching - does anyone have this engine and a Max Prop - and if
so, do you know how the prop is pitched?? I cannot reach maximum
speed (I am looking for 6.65 which I used to get and others get) with
this prop.

Alan

At 12:21 PM 3/29/2006, you wrote:
>Rick wrote:
>>Hi Cindy. You grabbed my attention with the valve adjustment. Do
>>you have a Volvo engine? If so I would love to know more on the
>>valve adjustment. The engine on Lorac, a Baba 30, smokes badly and
>>leaves a "dirty butt" in a matter little time. I have thought about
>>re-powering Lorac, but the engine runs good and the hand cranking
>>feature is priceless. Please tell me more!!!
>>Fair winds, blue water.
>>Rick Williams.
>>S/V Lorac; Baba 30 # 71
>
>Hi Rick,
>
>We've got a Yanmar 3GMF, so I'm not sure how applicable this is, but
>we had a LOT of smoking problems when we bought Mandisa. There were
>also issues with not being able to reach the top RPMs, so clearly
>she was over-propped. We replaced the prop (Michigan Wheel Sail
>model) and the RPMs were better, but still not quite what Rick felt
>we should be getting and we still were smoking. So he had the prop
>repitched slightly which took care of the RPMs, but we were *STILL*
>smoking! The smoking wasn't as bad as before, but it was still
>pretty bad and, of course, the "dirty butt" looks terrible. Rick
>asked around and everyone told him that "Yanmars always smoke". He's
>been getting more and more involved in doing his own maintenance on
>the engine so he decided to try setting the valves. (He used to be
>quite the high school hot rodder, but that was a long time ago and
>he's just now getting back into it.) He bought some feeler guages
>and set the valves according to the Yanmar manual. The first time he
>set them too tight, so he had to do it again. The second time seemed
>to be the charm because the engine has never sounded sweeter and we
>have very little smoke now!!! We did quite a bit of motoring on the
>last trip and stern of the boat looks great!!!
>
>I'm sure Rick can give you a more detailed (accurate) report, but
>he's not the email fiend that I am. Hopefully he'll chime in.
>
>Cindy
>s/v Mandisa
>Baba 30 #218
>
>
>
>
>
>-----------------------------------------------------------
>Baba Panda and Tashiba Owners Mailing List --
>For more info, please check out the FAQ...
>http://www.ballreich.net/hypermail/baba-l/faq.html



-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html

Received on Wed Mar 29 09:49:54 2006

Archive Index: Full Archive Yearly Archive