Baba Panda Tashiba Mailing List

Re: Puzzling Anchor Issue

Archive Index: Full Archive Yearly Archive

Re: Puzzling Anchor Issue

From: Harris Gabel <harris_gabel_at_hotmail.com>
Date: Tue Mar 28 2006 - 11:58:21 PST

We solved the problem of the anchor chain rubbing on the bobstay by using
two anchor smubbers. We have a "U" shaped piece of steel that grabs the
chain. Then we have one nylon snubber coming from each sice of the U
piece, one going through the port hawse hole and the other through the
starboard. We let the snubbers out far enough so that the U piece is below
the bobstay (it is under water). The chain runs down from the U piece and
does not rub on the bobstay.

Harris Gabel
s/v Always Lucky
Baba 30





>From: Cindy Ballreich <cindy@ballreich.net>
>Reply-To: baba-l@ballreich.net
>To: baba-l@ballreich.net
>Subject: Re: [Baba-L] Puzzling Anchor Issue
>Date: Tue, 28 Mar 2006 09:17:11 -0800
>
>littleknotty@aol.com wrote:
>>Hello all,
>> Im wondering if you'all can help me solve an achoring problem I
>>experienced this weekend. I was at a very calm anchorage so my anchor
>>chain went strait down, there was no pull from the boat with current or
>>wind. All night long, the anchor chain rubbed against the cable that
>>runs from the bow sprit to the water line.
>> I have an anchor snubber but I don't see how that would have helped the
>>sitation. I have anchored previously but given that there is a little
>>wind or current, it generally keeps me off the chain.
>> I'm sure someone has a way to resolve this annoying problem.
>>
>
>We've had the same problem. We wrap a towel around the rode and secure it
>with tape. We then adjust the line so that the towel is against the
>bobstay. It does a pretty good job of getting rid of the noise. Another
>solution that prevents chafe, but which won't do much for the noise is to
>get the largest plastic shroud cover from West and put it over the bobstay.
>If you put a wire tie on the stay a couple of inches from the bottom, and
>make sure that the cover sits above the tie, it will let the water drain
>properly and won't create any rust issues.
>
>Where were you anchored if you don't mind my asking?
>
>Cindy
>s/v Mandisa
>Baba 30 # 218
>
>
>-----------------------------------------------------------
>Baba Panda and Tashiba Owners Mailing List --
>For more info, please check out the FAQ...
>http://www.ballreich.net/hypermail/baba-l/faq.html




-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html

Received on Tue Mar 28 13:26:05 2006

Archive Index: Full Archive Yearly Archive