Baba Panda Tashiba Mailing List

Re: Sole Refinishing- to Rick

Archive Index: Full Archive Yearly Archive

Re: Sole Refinishing- to Rick

From: Rick <rwsail35_at_houston.rr.com>
Date: Mon Mar 13 2006 - 19:26:44 PST

MessageHi Laura. If the stain has blackened the teak, you will probably =
have to live with it. I have no experience with the lemon juice and =
bleach can't cure rot. I prefer Semi-gloss. To keep the dust down, I lay =
a small shop-vac hose on the floor near my work area and turn it on. =
Some detail sanders have vacuum attachments, but I find them to be =
cumbersome.
Good luck and have fun.
Oh; I almost forgot, a frozen beverage of your choice really makes the =
job more enjoyable.
Rick Williams
Fair winds, blue waters.
S/V Lorac; Baba 30 # 71
  ----- Original Message -----
  From: Laura Lindstrom
  To: baba-l@ballreich.net
  Sent: Sunday, March 05, 2006 7:42 PM
  Subject: RE: [Baba-L] Sole Refinishing- to Rick




  Thank you for the detail in your description. I really appreciate it. =
Any advice on an old water stain that penetrated into the teak? I have =
heard lemon juice

  or bleach. Also, on your comparison of Hi gloss or Semi- gloss I =
could not tell which do you prefer. We were thinking of going with the =
Semi gloss, as the

  other teak in the boat is not glossy. One more thing, how do you keep =
dust to a minimum? THANKS AGAIN!!!!



  Laura

  S/V Blue Blaze

  Panda 38

  -----Original Message-----
  From: owner-baba-l@ballreich.net [mailto:owner-baba-l@ballreich.net] =
On Behalf Of Rick
  Sent: Saturday, March 04, 2006 9:19 AM
  To: baba-l@ballreich.net
  Subject: Re: [Baba-L] Sole Refinishing



  Hi Laura. When I sand my cabin sole I begin by taping to parameter =
rises adjacent to the floor, using the blue 3M 2" tape, to prevent =
damaging the teak surface close to the work area. I then begin by =
sanding with an 80 grit paper to remove old varnish and grime. Next, I =
go to a 150 grit. After that I vacuum the entire work area and wipe the =
entire parameter down with a damp rag. Next, wipe the sanded area down =
with Acetone and allow to dry. The final step before application of =
varnish is to wipe the sanded area with a tack cloth. I then apply the =
varnish. I have had outstanding luck with Varathane. It is very =
resistant to abrasion and is a one part, low cost, easy to apply =
varnish. My cabin sole gets heavy traffic and tends to last about 3 =
years. It takes a full week-end to do the job on a Baba 30.

  HINTS. 1. Never sand across the grain. 2. Pull the varnish from one =
end to the other, in a straight line. 3) Hi Gloss makes it difficult to =
see spilled fluids on the floor, Semi-Gloss looks great but allows =
better visualization of spill for quicker cleanup and less damage. 4. =
Either hand sand or use a finish sander. Orbital sanders tend to make =
swirls in the wood which WILL show up. 5. 220 grit sanding does not =
allow the varnish to penetrate as well as 150 and the durability of the =
varnish is reduced. 6. Allow 72 hours after final coat before exposing =
the cabin sole to traffic.

  Have Fun

  Fair Winds, blue waters.

  Rick Williams

  S/V Lorac, Baba 30 # 71.

    ----- Original Message -----

    From: Laura Lindstrom

    To: baba-l@ballreich.net

    Sent: Friday, March 03, 2006 12:00 PM

    Subject: [Baba-L] Sole Refinishing



    Hi, I am interested in having our cabin sole refinished. Does =
anyone have any experience with

    this project? I can't find anyone in town( Jacksonville, FL) who =
does. Would appreciate any

    advice. Thanks.



    Laura Lindstrom

    "Blue Blaze" Panda 38

    (904)705-4485





    The information contained in this e-mail and the attachments =
transmitted herewith is confidential and is intended solely for the use =
of the individual or entity to whom it is addressed. This e-mail and the =
attachments sent herewith may contain material that is privileged or =
protected from disclosure under applicable law. If you are not the =
intended recipient or the individual responsible for delivering this =
information to the intended recipient, please (1) be advised that any =
use, dissemination, forwarding, or copying of this document IS STRICTLY =
PROHIBITED; and (2) please notify the sender immediately and delete this =
message and all copies and backups thereof. Thank you.






-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html

Received on Wed Mar 22 16:31:55 2006

Archive Index: Full Archive Yearly Archive