Ken,
I am testing a new FTP file server for our Baba site for projects &
publications. You might want to post them there. I don't have time to give
elaborate instructions this AM, but it's fairly intuitive.

Here's the URL: ftp://babaowners.org

You upload the files to: ftp://babaowners.org/incoming. Don't worry about
them showing up after the upload. All files in that directory are hidden.
After you upload them, send me an e-mail to let me know they are there. Then
I'll move them over to the site for all to see. A nice txt file about what
you've included helps everyone.

Let me know how it goes.
-Bruce, webmaster

-----Original Message-----
From: owner-baba-l@ballreich.net [mailto:owner-baba-l@ballreich.net] On
Behalf Of The Ken Pearce
Sent: Monday, December 19, 2005 1:01 AM
To: baba-l@ballreich.net
Subject: RE: [Baba-L] Water Tanks

Debra,

I have pictures and some measurements for you, but I'll have to wait until
tomorrow to upload the pictures.

The tanks are not alike, in fact they look rather custom made.

Starboard Tank:
- input and vent are at the rear, top starboard corner of the tank, there is
a 6"x6"x2" deep indent where the vent and input hoses attach to two
90-degree elbows that enter the tank from the top.

- output is at the front of the tank, lower port corner, with the fitting
exiting straight and pointing toward the bow.

More information tomorrow...

Ken Pearce
Bellingham, WA
s/v Shantih, 83-Baba-30


>From: Debra Axness <debonair1@gmail.com>
>Reply-To: baba-l@ballreich.net
>To: "Baba, Panda and Tashiba" <baba-l@ballreich.net>
>Subject: [Baba-L] Water Tanks
>Date: Thu, 15 Dec 2005 11:29:34 -0500
>
>Sorry to bother the whole group again, but is there anyone with a
>Baba-30 who is willing to look at their water tanks to take a measurement
for us?
>Even if you can only get to the starboard tank that would help us out
>immensely. If you could look at where the outflow on the tank is - is
>it pointing lengthwise - on the starboard side, closer to the forepeak,
>pointing towards the fore, and on the port side, closer to aft,
>pointing aft? Or does the outflow point cross-wise, towards the bilge?
>And how far away from the corner is it? We need to know for specs for
>our tanks that are being built. Also, can you take a look at the cutout
>on the tank for inflow and vent - could you also measure this? What
>the height of the cutout is (Maybe it's two or three inches deep?).
>Being able to get our new water tanks will be the best Christmas
>present we could possibly get, and I appreciate very much any help
>someone on the list can give me.
>Happy holidays to all!




-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List -- For more info, please check
out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html





-----------------------------------------------------------
Baba Panda and Tashiba Owners Mailing List --
For more info, please check out the FAQ...
http://www.ballreich.net/hypermail/baba-l/faq.html

Received on Mon Dec 19 05:41:29 2005