You might also consider adding to your holding tank:

A Groco Sweewater system: http://www.groco.net/prodcts-frame-all.htm

A tank tender.

I do not vent to the outside the vented loops - does anyone else?

A lot of knowledgable people leave off the vented loop on the fesh
water intake side -

Alan

At 04:42 PM 9/11/2005, you wrote:
>Okay, I'm starting to plan a big project. I need to do this sooner or later.
>
>First, I just finished reading Peggy Hall's book. Some really great
>information!
>
>I created a diagram of my existing plumbing. Here is what I want (need?) to
>do:
>
>1. Install a new large tank in the V-berth. I have a bow thruster, so the
>entire V-berth is not available, but a section in front of it is. I have
>marked it on the overall diagram, as well as included pictures. I need to
>get some dimensions and ask Ronco if they have anything close.
>2. Install a vented loop on the freshwater intake, after the pump, as her
>book suggests.
>3. Vent the two existing loops.
>4. Install a vented loop on the macerator pump.
>5. Enlarge the vent on my existing holding tank.
>
>Here are some questions I have:
>1. Should I just replumb everything, since I know much of the system is
>original (1983).
>2. Should I try to use my original tank as a backup or abandon it? I don't
>need the space in the bilge.
>
>Here is where my pictures/diagrams are:
>http://www.pappalini.com/projects/Plumbing.htm
>
>Thanks for your help.
>-Bruce
>
>Bruce Colglazier Pappas *
>20 Ardmore Drive * Golden Valley, MN 55422-5208 USA *
>763-377-9874 * fax 763-377-8189 *
>bruce # pappalini.com
>www.pappalini.com
>
>
>
>


_/)..._/)..._/)
Browse Forum: http://list.sailjazz.com/read/?forum=baba
Get Help? http://www.sailjazz.com/forums/help/index.htm
To unsubscribe send a blank email to leave-baba-7798K@list.sailjazz.com
_/)...._/)...._/)...._/)

Received on Sun Sep 11 15:54:24 2005