I've thought about that in place of the chain hook. What do you do to
release it in a hurry if, for example, the wind comes up and you need to
veer out more scope? Good point about letting out enough rode to take
the load off the windlass!
 
Rick Emerson
S/V One With the Wind, Baba 35

David Glueck wrote:

> I have had great luck with a "double snubber" I don't remember where I
> got it, but it is a square s/s plate about 3/8" thick with a slot for
> the anchor chain and two holes in each corner that takes a shackle. To
> each shackle I have attached a 25' length of 5/16" anchor line. After
> setting the anchor, I hook the plate on the chain, lead one and then
> the other line through the port and stbd hawse pipes and then let out
> chain slowly until the snubber is about a foot below the water with
> equal tension on both sides. I keep a slack section of chain between
> the snubber and the windlass, so there is no load at all on the
> windlass. Sometimes, depending on the wind I will move it a little to
> either port or stbd to minimize the riding. This seems to work very well.
>



_/)..._/)..._/)
Browse Forum: http://list.sailjazz.com/read/?forum=baba
Get Help? http://www.sailjazz.com/forums/help/index.htm
To unsubscribe send a blank email to leave-baba-7798K@list.sailjazz.com
_/)...._/)...._/)...._/)

Received on Tue Jun 21 08:23:19 2005