Shane,

Wow, that's very interesting. I have the highest respect for Brion Toss.
>From what you said it seems Brion wanted some built in curve in the mast as
the regular configuration when tuned properly. Is that the way the mast
looks now? Another words, does it look like it has a natural bend? How does
the boat sail? Gray Eagle's mast looks straight up without rake and sails
with "slightly" more weather helm than I would like.

Richard Cassano

> -----Original Message-----
> From: Shane Wilson [mailto:vermeerasia # hotmail.com]
> Sent: Friday, May 06, 2005 12:37 PM
> To: Baba, Panda and Tashiba List
> Subject: RE: [baba] Mast Rake
> Importance: High
>
> I just had my Panda 40 hull 129 re-rigged and replaced the rotten mast
> step.
> On the advice of my rigger, Brion Toss, I moved the mast base aft an
> inch
> or so to give the mast a better curve when the rig is fully tuned. Brion
> would have like even more that an inch aft, but I couldn't go back any
> further due to the design of my new step. So, the mast no longer sits
> upright under slack rigging, but actually tilts forward a bit at the
> masthead.
>
> Best Regards,
>
> Shane Wilson
> Panda 40 S/V Muse
> Port Townsend, WA
>
> >From: Richard Cassano <rcassano # optonline.net>
> >Reply-To: "Baba, Panda and Tashiba List" <baba # list.sailjazz.com>
> >To: "Baba, Panda and Tashiba List" <baba # list.sailjazz.com>
> >Subject: RE: [baba] Mast Rake
> >Date: Thu, 05 May 2005 03:32:38 -0400
> >
> >On Tashiba 40, hull # 160 the mast is straight up - no rake. I asked
> about
> >this when the standing rigging was replaced a few years ago and was told
> it
> >was the correct setup for this boat. There is a hydraulic back stay so we
> >can bend the mast aft when close hauled.
> >Rich Cassano, Gray Eagle, Oyster Bay, NY
> >
> > > -----Original Message-----
> > > From: Steve Sullivan [mailto:scsullivan # mchsi.com]
> > > Sent: Wednesday, May 04, 2005 8:28 PM
> > > To: Baba, Panda and Tashiba List
> > > Subject: [baba] Mast Rake
> > > Importance: High
> > >
> > > Re-setting my mast for the first time and was wondering what amount of
> > > mast rake you have found optimal on a Baba 40? The setting before
> taking
> > > the mast down last fall was around 2 degrees or about 14"+ measured at
> >the
> > > boom gooseneck from the back of the mast to a halyard hanging from the
> > > mast head. This seems a little much for a cruiser. Also, has anyone
> > > noticed the mast step (or possibly the partners) positioned off-center
> > > athwartships? Your thought will be appreciated. Thanks.
> > >
> > > Steve Sullivan
> > > s/v Tamboura
> > > Baba 40, 144
> > >
> >
> >
> >
> >
>
>
>
>



_/)..._/)..._/)
Browse Forum: http://list.sailjazz.com/read/?forum=baba
Get Help? http://www.sailjazz.com/forums/help/index.htm
To unsubscribe send a blank email to leave-baba-7798K@list.sailjazz.com
_/)...._/)...._/)...._/)

Received on Fri May 06 11:53:04 2005